Mechanical, HVAC & Energy Loss
Welding cost, solder, adhesive, heat load, duct, insulation, steam, heat exchanger, vacuum, and hydraulic systems.
Pro calculators
- Adhesive And Sealant Consumption OptimizationPRO
Adhesive bead diameter and pitch are not optimized, creating unnecessary consumption.
- Air Duct Friction And Fan Energy ConsumptionPRO
Duct design is not optimized, fan energy consumption is unnecessarily high.
- Heat Exchanger Contamination And Loss Of EfficiencyPRO
Heat exchanger fouling increases energy consumption, the cleaning interval cannot be optimized.
- Heat Load And Heating Cooling Capacity OptimizationPRO
Boiler/AC/chiller capacity is chosen by intuition, becoming oversized or undersized.
- Hydraulic System Heating And Cooling Energy LossPRO
Hydraulic oil overheats, cooling energy and oil life cost cannot be calculated.
- Insulation Thickness And Energy Saving OptimizationPRO
Pipe/tank insulation thickness exceeds or falls short of the optimal point.
- Solder And Smd Assembly Waste And CostPRO
Solder paste waste rate and cost in PCB assembly is not tracked.
- Steam Trap Leakage And Energy LossPRO
The annual energy cost of steam leaking from faulty steam traps is unknown.
- Vacuum System Leakage And Energy LossPRO
Vacuum leaks are invisible like compressed air leaks, silently increasing energy costs.
- Welding Cost And Filler Metal ConsumptionPRO
Wire, gas, energy, and labor cost based on weld joint geometry cannot be calculated.